Makcote Epoxy Binder is a two-component, low viscosity, epoxy resin system to which Makrete Fillers M4/M6s can be added to produce epoxy mortars having a variety of consistencies. Makcote Epoxy Binder also forms part of the Makrete Epoxy Primer system.
• Combining with selected fillers and aggregates to produce epoxy mortars of various consistencies.
• Used with selected filler additions to produce bolt or vertical starter-bar grouts
• Can be used as a priming system with some Makrete Patch Repair range
• Can be mixed with fine aggregates such as Makrete M4/M6 Filler to produce mortar of different consistencies for fast and permanent patch repair of concrete floors, particularly where high strength, abrasion and chemical resistance is required.
• Early development of initial hardness, minimizes maintenance disruption
• Unaffected by a wide range of acids, alkalis and industrial chemicals
• Up to 90MPa compressive strength – depending on mix consistency
• Versatile mixing consistencies for a wide range of application
• HACCP certified for use in food handling areas
• Complies with AS4020:2018 – suitable for use in contact with drinking water
• Australian Made and Australian Owned
Due to the concerns regarding water tightness issues over the last few years we have been asked to provide a
Makrete Fillers M4/M6 are graded silica sand which has been cleaned and dried. Makrete Fillers can be used to create
SikaQuick®-2500 is a 1- part, cementitious, very rapid hardening, early strength gain concrete repair material.
– On, above
