MAKPATCH FC

Makpatch FC cementitious fairing coat is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent cementitious fairing mortar. Makpatch FC is based on a blend of cements, graded aggregates, special fillers and chemical additives to provide a material with good handling characteristics with ease of application.

Recommended Uses

• Available in 3 colours – white, off white and grey
• Filling in imperfections on honeycomb or pinholes on concrete surfaces.
• Repair to defects in concrete surface
• For use on vertical application
• Stand alone or left exposed application that does not require an additional coating
• Internal and external application
• Surface imperfections up to 5mm in depth can be filled with one coat application.
• Used independently to infill surface imperfections and voids or to render large sections of concrete or masonry ranging from feather edge up to 5mm thickness.

Features & Benefits

• Fast setting
• Excellent bond to concrete – substrate
• Internal/External application produces a smooth finish
• Easy to use – simply add water – no primer needed in most cases
• Durable repair
• Excellent workability
• Can be over coated with conventional surface coatings
• Can be left exposed as finished final coat
• Pre-blended to overcome site-batched variations – only the site addition of clean water is required
• Can be applied from feather edge to 5mm in a single application